Chapter 5
Operations — Network connection
ENGLISH - 133
Setting the projector
1) Connect the projector to a computer using a LAN cable.
2) Turn on the power of the projector.
3) Press the <MENU> button to open the [NETWORK] menu from the main menu.
f
The
[NETWORK]
screen is displayed.
4) Press
as
to select [WIRED LAN], and press the <ENTER> button.
f
The
[WIRED LAN]
screen is displayed.
5) Perform the [WIRED LAN] setting.
f
Refer to [WIRED LAN] (
x
page 122) for details.
Note
f
To connect to an existing network, perform after consulting your network administrator.
r
Factory default setting
f
Following setting has been made as a factory default.
[DHCP]
OFF
[IP ADDRESS]
192.168.0.8
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.0.1
[DNS1]/[DNS2]
None
Operating the computer
1) Turn on the power of the computer.
2) Perform the network setting following the instruction of your network administrator.
f
Operation from the computer is possible by configuring the network setting of the computer as follows if the
projector is in the factory default setting.
[IP ADDRESS]
192.168.0.10
[SUBNET MASK]
255.255.255.0
[DEFAULT GATEWAY]
192.168.0.1
Summary of Contents for DLP PT-FRZ50
Page 38: ...38 ENGLISH Chapter 3 Basic Operations This chapter describes basic operations to start with ...
Page 130: ...130 ENGLISH Chapter 5 Operations This chapter describes how to use each function ...
Page 188: ...Index 188 ENGLISH WAVEFORM MONITOR 92 Web control 134 WHITE GAIN 65 WIRED LAN 122 Z ZOOM 70 ...
