Panasonic DLP PT-FRZ50, Operating Instructions (Functional Manual)

Page: 168 / 189

Chapter 7 Appendix — Technical information
168 - ENGLISH
Technical information
Using the PJLink function
The network function of this projector supports the PJLink class 1 and class 2, and the PJLink protocol can be
used to perform projector setting and projector status query operations from a computer.
Note
f
Setting the password of the administrator account (
x
page 123) is required for using the PJLink function of the projector.
PJLink commands
The following table lists the PJLink commands supported by the projector.
f
x characters in tables are non-specific characters.
Class Command Control details
Parameter/
response string
Remark
1 POWR Power supply control
0 Standby
1 Power on
1 POWR?
Power supply status
query
0 Standby
1 Power on
1, 2
INPT Input selection
11 COMPUTER1
12 COMPUTER2
21 VIDEO
INPT? Input selection query 32 HDMI1
33 DIGITAL LINK
36 HDMI2
1
AVMT
Shutter control/audio
output control
10 Shutter function disabled (shutter: open), mute function disabled
11 Shutter function enabled (shutter: closed), mute function disabled
20 Shutter function disabled (shutter: open), mute function disabled
21 Shutter function disabled (shutter: open), mute function enabled (muted)
30 Shutter function disabled (shutter: open), mute function disabled
31
Shutter function enabled (shutter: closed), mute function enabled
(muted)
AVMT?
Shutter status query/
audio output status
query
11 Shutter function enabled (shutter: closed), mute function disabled
21 Shutter function disabled (shutter: open), mute function enabled (muted)
30 Shutter function disabled (shutter: open), mute function disabled
31
Shutter function enabled (shutter: closed), mute function enabled
(muted)
1 ERST? Error status query xxxxxx
1st byte
Indicates fan errors, and returns 0
or 2.
f
0 = No error is
detected
f
1 = Warning
f
2 = Error
2nd byte
Indicates light source errors, and
returns 0 or 2.
3rd byte
Indicates temperature errors, and
returns 0 - 2.
4th byte Returns 0.
5th byte Returns 0.
6th byte
Indicates other errors, and returns 0
- 2.
1 LAMP?
Light source status
query
xxxxxx
1st number (1 - 5 digits): Light source runtime
2nd number: 0 = Light source off, 1 = Light source on
1, 2 INST? Input selection list query 11 12 21 32 33 36 ―
1 NAME? Projector name query xxxxx
Returns the name set in the [NETWORK] menu
→
[PROJECTOR
NAME].
1 INF1?
Manufacturer name
query
Panasonic Returns manufacturer name.
1 INF2? Model name query
PT-FRZ60
PT-FRZ50
Returns model name.