Panasonic DLP PT-FRZ50, Operating Instructions (Functional Manual)

Page: 139 / 189

Chapter 5 Operations — Web control function
ENGLISH - 139
[Basic control] page
Click [Projector control]
→
[Basic control].
4
3
5
2
1
6
1 [POWER]
Turns off/on the power.
2 [SHUTTER]
Switches whether to use the shutter function (enabled (shutter:
closed)/disabled (shutter: open)).
3 [OSD]
Switches off (hide)/on (display) the on-screen display function.
4 [SYSTEM]
Switches the system method.
5 On-screen display of the projector
Displays the same items as shown on the on-screen display of
the projector. You can check or change the settings of the menus.
It is displayed even if the on-screen display function is set to off
(hide).
6 [INPUT SELECT]
Switches the input signal.
[Detail control] page
Click [Projector control]
→
[Detail control].
4
3
5
2
1
8
7
6
1 Control of the projector
The projector is controlled by clicking the buttons in the same way
as the buttons on the remote control. After control, the on-screen
display of the projector at the right of the control page is updated.
2 [SUB MEMORY]
Switches the sub memory.
3 [DAYLIGHT VIEW]
Switches the day light view setting.
4 [FREEZE]
Temporarily pauses the image.
5 [WAVEFORM MONITOR]
Displays the waveform of the input signal.
6 [MUTE]
Switches whether to use the mute function.
7 [TEST PATTERN]
Displays the test pattern.
8 [GET OSD]
Updates the on-screen display of the projector at the right of the
control page.