Panasonic DLP PT-FRZ50 Operating Instructions (Functional Manual) Download

Page: 156 / 189

Chapter 5

Operations — Updating the firmware

156 - ENGLISH

File name (example): FirmUpdateTool_FRZ50_101.exe

2) Double-click the executable file generated by extracting.

The update tool is started up, and the confirmation screen is displayed.

PT-FRZ60 / FRZ50 / FRZ55

3) Confirm the status of the projector.

Confirm that the projector to be updated is in the standby mode.

4) Confirm the connection status.

Confirm that the projector to be updated and the computer to be used for update are correctly connected

via LAN.

5) Click [Next].

The license agreement screen is displayed.

Confirm the content of the license agreement.

The update tool will end by clicking [Close].

6) Select [I accept].

Summary of Contents for DLP PT-FRZ50






























































































































































































Search results

Summary of Contents for DLP PT-FRZ50

Reviews:

Related manuals for DLP PT-FRZ50

Brands by name

Popular brands

Panasonic DLP PT-FRZ50, Operating Instructions (Functional Manual)

Search results

Summary of Contents for DLP PT-FRZ50

Reviews:

Related manuals for DLP PT-FRZ50

Brands by name

Popular brands