Panasonic DLP PT-FRZ50, Operating Instructions (Functional Manual)

Page: 106 / 189

Chapter 4 Settings — [PROJECTOR SETUP] menu
106 - ENGLISH
[SYSTEM SELECTOR] Switches the [SYSTEM SELECTOR] setting. (
x
page 67)
[DAYLIGHT VIEW] Switches the [DAYLIGHT VIEW] setting. (
x
page 66)
[WAVEFORM MONITOR] Displays the waveform of the input signal. (
x
page 92)
4) Press the <ENTER> button.
[AUDIO SETTING]
Set audio functions in detail.
Adjusting the volume
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press
as
to select [VOLUME].
4) Press
qw
to adjust the level.
Operation Adjustment Range of adjustment
Press
w
. Increases the volume.
0 - 63
Press
q
. Decreases the volume.
Adjusting the left to right audio balance
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The [AUDIO SETTING] screen is displayed.
3) Press
as
to select [BALANCE].
4) Press
qw
to adjust the level.
Operation Adjustment Range of adjustment
Press
w
. Increases the volume on the right.
L16 - R16
Press
q
. Increases the volume on the left.
Setting audio output in the standby mode
1) Press
as
to select [AUDIO SETTING].
2) Press the <ENTER> button.
f
The
[AUDIO SETTING]
screen is displayed.
3) Press
as
to select [IN STANDBY MODE].
4) Press
qw
to switch the item.
f
The items will switch each time you press the button.
[OFF] No audio is output during standby.
[ON]
Audio is output during standby.
Note
f
No audio is output in the standby mode when the [PROJECTOR SETUP] menu → [ECO MANAGEMENT] → [STANDBY MODE] is set to
[ECO].
Setting audio output while using the shutter function
1) Press
as
to select [AUDIO SETTING].