Panasonic BL-WV10A Operating Instructions Manual Download Page 13

Page: 13 / 184

Names and Locations

[For assistance, please call: 1-800-272-7033]

Indicators

The indicators display the status of the BL-WV10A and network conditions.

During Quick Setup

During Normal Operation

Indicator

Color

Description

Power

Amber (flashing)

Unit is in Quick Setup mode.

Wireless

Green

Quick Setup for a camera is in progress,
or Quick Setup has been completed for
the BB-HGW700A.

Green (flashing)

Quick Setup has been completed for a
camera.

Indicator

Color

Description

Timer/Busy

Green

Timer/Sensor recording has been set.
Turn off by pressing [TIMER] on the
remote control.

Green (flashing)

Timer/Sensor recording cannot be turned
on because the SD memory card is full.
The indicator will flash for about 6
seconds.
Also flashes when the timer recording
setting is invalid (no SD memory card
installed, etc.)

Off

Timer/Sensor recording is not set. Turn on
by pressing [TIMER] on the remote
control.

Amber (flashing)

Data is either being written to or read from
the SD memory card.

Power

Green

The unit is turned on.

Red (flashing)

A problem was detected during the
power-on diagnostics.

Amber (flashing)

Power-on diagnostics are in progress.

Alert

Green

The buzzer is turned on. Turn off by
pressing [ALERT] on the remote control.

Off

The buzzer is turned off. Turn on by
pressing [ALERT] on the remote control.

Summary of Contents for BL-WV10A

























































































































































































Search results

Summary of Contents for BL-WV10A

Reviews:

Related manuals for BL-WV10A

Brands by name

Popular brands

Panasonic BL-WV10A, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10A

Reviews:

Related manuals for BL-WV10A

Brands by name

Popular brands