Panasonic BL-WV10A, Operating Instructions Manual

Page: 42 / 184

2 Connecting Cameras
42
2.4 Connecting Cameras Using a Router
Note about connecting a router
• Before registering existing cameras, assign Static IP addresses to the
cameras, and set the cameras to be accessible over the Internet if so desired.
Refer to the Operating Instructions included with your cameras and router for
more information.
2.4.1 Connection Overview
1.
Connect the BL-WV10A to the television and router (see page 42)
• The [Basic Setup] screen appears.
2.
Set the camera IP address (see page 44)
3.
Set the user name and password (see page 45)
• If the cameras in use are already connected to a router, change the
camera user names and passwords to the administrator name and
password for the BL-WV10A and run Quick Setup. If you run Quick Setup
without making these changes, the registered cameras will become
remote cameras.
• If the cameras are still set to the default settings, Quick Setup will
automatically assign user names and passwords. There is no need to set
the administrator name and password manually.
4.
Configure the cameras using Quick Setup (see page 47)
5.
Confirm the camera images (see page 50)
6.
Place the cameras and the router (see page 52)
2.4.2 Television and Router Connection
1.
Connect the video cable from the BL-WV10A video output port to the
television’s video input (yellow) jack.
TV
Rear panel of BL-WV10A
Video cable
Video output port
To external
video input
of TV