2
Connecting Cameras
[For assistance, please call: 1-800-272-7033]
49
•
Once registration is complete, the buzzer will ring, and the wireless
indicator will flash green.
Note
•
Quick Setup can take place within 20 minutes of powering on the camera.
If the camera is not recognized, or if [Restarting camera] is displayed at
the bottom of the screen for more than 2 minutes without camera
registration beginning, reset the camera to its default settings and
reconnect the camera.
3.
To register additional cameras, connect the Ethernet cable to the new
camera, and turn it on.
•
When registration is complete, the buzzer will sound and the wireless
indicator will flash once for each of the cameras registered.
4.
Once all of the cameras have been registered as in step 3, turn the BL-
WV10A off.
Note
•
Cameras for which the user name and password matches that of the BL-
WV10A will be automatically registered within the camera list as local
cameras. (Non-matching cameras will be registered as remote cameras.)
•
Cameras registered as remote cameras will remain so even if the user
name and password are changed to match those of the BL-WV10A. To re-
register a camera as a local camera, see page 53.
When camera
registration is
complete,
[Finished] is
displayed.
Summary of Contents for BL-WV10A
Page 179: ...179 Index...
Page 183: ...For assistance please call 1 800 272 7033 183...