3
Viewing Camera Images
54
3
Viewing Camera Images
Once Quick Setup is complete, set the mode switch on the back of the unit to
[NORMAL], disconnect the DC plug from the back of the unit, then reconnect it.
After the unit starts up, the camera image will be displayed.
Note
•
Frame rate (frames per second, “fps”) may vary depending on the image
being viewed by the camera, brightness, and other environment
conditions, as well as network conditions such as distance between the
BL-WV10A and the cameras, the number of cameras connected, network
traffic, wireless network conditions (see page 6), etc.
•
For BL-C10A and BL-C30A, a maximum of 15 fps in LOW quality
(resolution) and 7.5 fps in HIGH quality is possible (see page 124).
•
For HCM series cameras, a maximum of 30 fps in LOW quality and 12 fps
in HIGH quality is possible (see page 124).
•
Network speed may decrease while the BL-WV10A is turned on and
connected to cameras.
•
The display size and brightness of the Monitoring Screen can be adjusted
(see page 122).
Summary of Contents for BL-WV10A
Page 179: ...179 Index...
Page 183: ...For assistance please call 1 800 272 7033 183...
