6
Setup Menu
[For assistance, please call: 1-800-272-7033]
119
Note
•
If turning the timer off by pressing [TIMER] does not cancel the timer recording,
the camera cannot be erased.
When the camera is used for Sensor Alert:
“This camera is used for Sensor Alert mode. Set Sensor Alert to [-] on the [Camera
Sensors] screen.”
Deactivate the camera for Sensor Alert mode as explained in the error message
and then try erasing the camera.
6.6
Changing the Order of the Camera List
1.
Select [Camera Setup] from the [Setup] screen (see page 95) and press
[ENTER].
2.
To move a camera up in the list, select it and press [2].
3.
To move a camera down in the list, select it and press [3].
Note
•
The order of the cameras displayed in the Camera List in normal mode
and the order of cameras displayed in the Quick Setup screen are
controlled separately. The order of cameras displayed in the Quick Setup
screen when adding cameras is not the same as ordered in the Camera
List.
Summary of Contents for BL-WV10A
Page 179: ...179 Index...
Page 183: ...For assistance please call 1 800 272 7033 183...
