Panasonic BL-WV10A Operating Instructions Manual Download Page 19

Page: 19 / 184

Names and Locations

[For assistance, please call: 1-800-272-7033]

•

Some manufacturers have multiple codes. If the code you entered does not
work, please select one of the other codes for that manufacturer.

•

If the television’s manufacturer is not listed above, please use the remote
control supplied with the television.

•

If the batteries are removed from the remote control for thirty minutes or longer,
the remote control setting will be reset and you will need to enter the
manufacturer’s code again.

Using the remote control

Below is an example of how the remote control is used to navigate through on-
screen menus.

Operation hints are shown here.

Example:
Press [ENTER] to enter the [Camera List] screen.

Remote control buttons and keys that can be used are shown here.

[ENTER]

Navigator keys

Summary of Contents for BL-WV10A

























































































































































































Search results

Summary of Contents for BL-WV10A

Reviews:

Related manuals for BL-WV10A

Brands by name

Popular brands

Panasonic BL-WV10A, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10A

Reviews:

Related manuals for BL-WV10A

Brands by name

Popular brands