Panasonic BL-WV10A, Operating Instructions Manual

Page: 52 / 184

2 Connecting Cameras
52
(see page 96).
2.4.7 Placing the Router and the Cameras
Place cameras after confirming the camera image (see page 50) and the router
after confirming it has been correctly registered and connected.
1.
Place the router and the cameras.
• Refer to page 6 in this manual as well as the Operating Instructions
included with the camera for proper placement.
2.
Make sure the BL-WV10A is turned off.
3.
Connect the LAN cables to the devices as necessary but do not turn them on.
4.
Turn on router and all cameras connected to the router.
5.
Set the mode switch on the back of the BL-WV10A to [NORMAL] and turn it
on.
6.
Turn on the cameras connected to the BL-WV10A.
7.
Confirm that each camera can be accessed from the BL-WV10A.
• Camera information can be displayed by pressing [DISPLAY] while
monitoring a camera. When placing a wireless camera, refer to the signal
strength displayed on-screen for optimum transmission quality.
Transmission problems can result in connection faults and problems when
monitoring the camera.
Strongest signal Weakest signal No signal
Current date
and time
Signal
strength