Panasonic BL-WV10A Operating Instructions Manual Download Page 133

Page: 133 / 184

Adding Cameras

[For assistance, please call: 1-800-272-7033]

133

•

When registration is complete, the buzzer will sound and the wireless
indicator will flash once for each of the cameras registered.

•

The Quick Setup screen will appear differently based on the network on
which it is used.

•

The camera can also be registered manually (see page 105). However,
any additional cameras will be registered as remote cameras.

Note

•

To add more cameras, connect the Ethernet cable to the camera to be
added, and re-perform step 2.

Once all of the cameras have been registered as in step 2, set the mode
switch on the back on the BL-WV10A to [NORMAL], turn the BL-WV10A off
and then turn it back on again.

Confirm the camera images.

•

Place the cameras after confirming that they display images correctly.

When camera
registration is
complete,
[Finished] is
displayed.

Summary of Contents for BL-WV10A

























































































































































































Search results

Summary of Contents for BL-WV10A

Reviews:

Related manuals for BL-WV10A

Brands by name

Popular brands

Panasonic BL-WV10A, Operating Instructions Manual

Search results

Summary of Contents for BL-WV10A

Reviews:

Related manuals for BL-WV10A

Brands by name

Popular brands