![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_operating-instructions-manual_277425092.webp)
3.2 Viewing Still Images on Your Mobile Phone
Still images from the camera can be viewed with a compatible mobile phone.
A
B
C
D
H
I
J
F
G
E
A.
Press [4] or [6] to pan the lens left or right, respectively, or
press [2] or [8] to tilt the lens up or down, respectively.
When the lens has reached the end of its pan or tilt range,
the corresponding number will not be displayed.
B.
Press [5] to refresh the image.
C.
Press [0] to toggle between the available image
resolutions (192
´
144 and 320
´
240). You can set the
default image resolution for when viewing with your mobile
phone (see Page 159).
D.
Select [Home Position] to move the lens to the home
position.
E.
Press [1], [3], [7] or [9] to move the lens to the first four
presets (presets 1–4).
F.
For presets 5–8, select the corresponding preset name to
move the lens to the desired position.
G.
BL-C230 only:
Controls the output signals of the external
H.
Select [Alarm Log] to view the last 50 external sensor and
motion detection trigger logs (see Page 94).
•
You must be logged in to the camera as an
administrator to use this feature.
I.
Select [Buffer/Transfer] to view the image buffer and
transfer control page (see Page 95).
•
You must be logged in to the camera as an
administrator to use this feature.
J.
Select [Privacy Mode] to turn privacy mode on. (You may
be asked to enter the administrator user name and
password.) To turn privacy mode off, access the camera
again and select [Disable Privacy Mode].
•
You must be logged in to the camera as an
administrator to use this feature.
Note
•
When accessing the camera as a general user or as a guest user, certain features may be disabled
according to the [Access Level] set for the user (see Page 152 and Page 155).
•
If the camera is configured to allow access from guest users (i.e., anonymous users; see Page 155),
users can access the camera’s mobile phone pages using a mobile phone or PC without entering a
user name or password. If guest user access is permitted, you can log in as the administrator by
selecting [Alarm Log], [Buffer/Transfer], or [Privacy Mode], and then entering the user name and
password when the authentication dialog is displayed.
92
Operating Instructions
3.2 Viewing Still Images on Your Mobile Phone
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...