![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_operating-instructions-manual_277425059.webp)
2.3 Disabling and Enabling a Trigger
After configuring an image buffering trigger, you can later disable the trigger to temporarily turn it off, and enable
it to turn it on again. While disabled, a trigger will not buffer images, transfer images, or send trigger notification.
Note
•
When you enable or disable a trigger, all images for all triggers buffered in the memory are deleted.
1.
Click the [Setup] tab.
2.
On the left side of the screen under [Buffer/Transfer], click [Trigger].
3.
Click a trigger number (1–5).
4.
Uncheck [Enable Image Buffer/Transfer] to disable the trigger.
•
To enable a trigger you disabled earlier, check [Enable Image Buffer/Transfer].
5.
Click [Save].
•
All images buffered are deleted when you click [Save].
Operating Instructions
59
2.3 Disabling and Enabling a Trigger
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...