6.
Set the following parameters as desired.
a.
Under [Time], select the days of the week when the trigger will be active.
b.
Select the time of day the trigger will be active, or click [Always] to enable the trigger for the full 24
hours of each day selected.
c.
Under [Image Setting], select the desired image format, image resolution, and image quality.
•
When [MPEG-4] is selected, the buffered MPEG-4 file contains audio from the camera’s
microphone if the microphone is enabled.
•
The image quality setting is not available when [MPEG-4] is selected as the image format.
•
When configuring the trigger to transfer images to a mobile phone’s E-mail address, set the image
resolution to 192
´
144, and set the image quality to [Favor Motion]. Note that your mobile phone
may not be able to receive the image if the file size of the image is too large.
•
Only one MPEG-4 timer can be set to buffer images at a time.
d.
Under [Image Buffer Frequency], select the desired buffer or transfer rate.
•
This setting is not available when [MPEG-4] is selected as the image format.
e.
Under [Transfer Method], select the desired buffer or transfer method.
•
MPEG-4 images cannot be transferred.
•
If [MPEG-4] is selected as the image format, [No Transfer, No Memory Overwrite] is the only
available option.
–
[No Transfer, No Memory Overwrite]: Images are not transferred. Images are buffered until the
memory is full.
–
[No Transfer, Memory Overwrite]: Images are not transferred. Once the memory is full, new images
replace the old images.
–
[FTP]: After an image is captured, it is transferred to the specified FTP site.
–
[E-mail]: After an image is captured, it is sent to the specified E-mail address.
–
[HTTP]: After an image is captured, it is transferred to the specified website.
7.
Follow the procedure below based on the settings you made under [Transfer Method].
a.
If you selected to not transfer images (i.e., to buffer images only), click [Save] to finish.
•
All images buffered in the internal memory for the selected trigger are deleted when you click
[Save].
b.
If you selected to transfer images by FTP, E-mail, or HTTP, click [Next].
•
The appropriate transfer settings page is displayed.
–
For FTP transfer, see Page 61.
–
For E-mail transfer, see Page 63.
–
For HTTP transfer, see Page 66.
Note
•
In order for this feature to work as expected, make sure the camera’s date and time setting is correct
(see Page 140).
•
When selecting the buffer or transfer rate, keep in mind that the actual rate may be slower depending
on network conditions, the number of people accessing the camera, and the type of objects being
viewed.
•
When the camera is configured to buffer images in MPEG-4 format, frame rate will decrease when
viewing MPEG-4 images on the single camera and multi camera pages.
Operating Instructions
53
2.1 Configuring a Timer Trigger
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...
