![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_operating-instructions-manual_277425133.webp)
5.3 Using the Camera in Wireless Mode (BL-C230
Only)
The BL-C230 can be used wirelessly. In this case, there is no need to connect a LAN cable to the camera.
In order to use the camera wirelessly, you must:
1.
Configure the camera for wired connection. Refer to the included Installation Guide and Setup Guide if you
have not done this.
2.
Configure the camera’s wireless settings (see Page 134).
3.
Restart the camera in wireless mode (see Page 138).
Note
•
If images cannot be displayed or if images break up, the following devices may be causing interference.
–
wireless LAN devices
–
2.4 GHz cordless telephones/faxes
–
microwave ovens
–
wireless AV devices
If the above devices are causing interference, change the wireless communication channels of the
camera and the router not to overlap with interfering devices. For more information, refer to the
operating instructions included with your wireless router.
•
If communicating to another wireless device (a PC, etc.) using the wireless router that the camera is
connected, streaming may become congested because the wireless bandwidth is shared.
Operating Instructions
133
5.3 Using the Camera in Wireless Mode (BL-C230 Only)
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...