![background image](http://html.mh-extra.com/html/panasonic/bl-c210-series/bl-c210-series_operating-instructions-manual_277425147.webp)
3.
Set the following parameters as desired.
a.
Under [Streaming Format], select the streaming format.
•
This setting may change the values selected for the [Refresh Rate] and [Image Resolution]
parameters for [Single Camera] and [Multi-Camera] on the [Image Display] page.
•
Certain features are unavailable depending on this setting. See 13.5 Feature Limitations Based
on Image Format for details.
b.
Under [Max. No. of HTTP Sessions], select the maximum number of HTTP sessions allowed.
•
See 1.4 Maximum Number of Viewing Sessions for details.
c.
Under [Max. No. of HTTPS Sessions], select the maximum number of HTTPS sessions allowed.
•
See 1.4 Maximum Number of Viewing Sessions for details.
d.
Under [H.264 Max. Frame Rate] or [MPEG-4 Max. Frame Rate], select the number of frames per
second the camera streams for each resolution setting.
e.
Under [H.264 Bit Rate] or [MPEG-4 Bit Rate], select the minimum and maximum bit rate for each
resolution setting.
•
This setting is for video only; it does not affect audio bit rate.
•
The bit rates specified here are used generally for images in which only small areas of the image
change from frame to frame (for example, when the subject is not moving, when the camera is not
panning or tilting, etc.). As more of the visible area changes (for example, when the subject is
moving, when the camera is panning or tilting, etc.), a higher bit rate is used, and the actual bit rate
used may exceed the limits specified here.
•
To limit the bandwidth used by the camera, adjust the [Max. Bandwidth Usage] setting of the
[IPv4] or [IPv6] pages (see Page 113 or Page 190).
f.
Under [RTSP], enter the port number used for RTSP. (Usually port number 554 is used.)
g.
Under [RTP], enter the first port number used for RTP. This port number must be an even number.
•
The port number above RTP is used for RTCP. For example, when port number 33000 is used for
RTP, port number 33001 is used for RTCP.
h.
Under [Multicast], check [Multicast settings screen is displayed.] to configure the camera for
multicasting, otherwise click [Save] to finish.
Operating Instructions
147
5.8 Changing Video Streaming Settings
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...