manualshive.com logo in svg

Panasonic BL-C210 Series, Operating Instructions Manual

Share
Download
Panasonic BL-C210 Series Operating Instructions Manual Download Page 157

•

You can select features individually, or click [Level 1], [Level 2], or [Level 3] to enable the
corresponding group of features.

•

BL-C230 only:

 [External Output] can be selected.

6.

Click [Save].

Note

•

Screen content varies by model number.

•

Users can click to center when using the ActiveX zoom feature, even if the click to center feature is
disabled. Users can click to center the image within the zoomed area, but the lens will not pan or tilt.

•

When [Change Resolution] is disabled, users may not be able to change the refresh rate even if
[Change Refresh Rate] is enabled, due to feature limitations based on the [Streaming Format] setting
on the [Video Streaming] page. For more information on these limitations, see Page 209.

•

Images displayed on the multi-camera page may be reduced in size when [View Multi-Camera page]
is enabled, therefore we recommend enabling [Change Resolution] as well.

Operating Instructions

157

6.4 Guest Users

Summary of Contents for BL-C210 Series









































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands