8.9 Resetting the Camera
You can reset all of the camera’s settings to their factory default settings.
1.
Click the [Maintenance] tab.
2.
On the left side of the screen under [Maintenance], click [Reset to Factory Default].
3.
Click [Execute].
•
The POWER indicator flashes orange, and then turns off for a few seconds.
Note
•
Do not turn off the camera while the camera is being reset. When the lens finishes panning and tilting,
it is safe to turn off the camera.
•
When the camera is reset, the following information will be deleted:
–
All images buffered in the internal memory
–
All alarm logs
–
All camera settings (including the user name, password, IP address, subnet mask etc.)
The network connection mode changes to [Automatic Setup]. Reconfigure the camera by referring
to the Setup Guide.
•
When the camera is reset, the internal clock will not be reset, but the time format will be set to AM/PM
mode. Change the setting if necessary (see Page 140).
•
See Page 211 for a list of the camera’s default settings.
184
Operating Instructions
8.9 Resetting the Camera
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...
