–
[SMTP authentication]: Select this option if the outgoing E-mail server requires SMTP authentication
when sending E-mail messages. The following settings are also necessary. Enter the settings as you
would for sending E-mail.
a.
Enter the login ID
(user name) required to access the server (max. 63 characters).
b.
required to access the server (max. 63 characters).
•
The camera supports LOGIN, PLAIN, and CRAM-MD5 authentication.
3.
Under [SSL], select [Use] if you want to use SSL encryption when sending E-mail.
•
When [Use] is selected, the port number under [E-mail Transfer] may need to be set to 465. Ask your
ISP or network administrator for the appropriate settings.
•
SSL supports SMTP over SSL. STARTTLS is not supported.
4.
Follow the procedure below based on the settings you made when configuring the trigger.
a.
If you selected to not send notification when the camera is triggered, click [Save], then click [Go to
Trigger page].
b.
If you selected to send notification when the camera is triggered, click [Next].
•
The appropriate notification settings page is displayed.
–
For E-mail notification, see Page 69.
–
For HTTP notification, see Page 72.
*1
[Space], ["], ['], [&], [<], and [>] cannot be entered.
*2
["] cannot be entered.
Operating Instructions
65
2.4.2 Transferring Images by E-mail
Summary of Contents for BL-C210 Series
Page 124: ...6 After the wizard is displayed click Next 124 Operating Instructions 5 2 HTTPS Settings ...
Page 126: ...9 Click Next 126 Operating Instructions 5 2 HTTPS Settings ...
Page 127: ...10 Click Finish Operating Instructions 127 5 2 HTTPS Settings ...
Page 131: ...6 Click Finish 7 Click Yes Operating Instructions 131 5 2 HTTPS Settings ...
