Panasonic BL-C210 Series Operating Instructions Manual Download Page 81

Page: 81 / 232

2.9 Adjusting Sensor Sensitivity

If using the camera’s built-in sensor to buffer or transfer camera images, you may want to adjust the sensor’s
sensitivity for optimal results.

Click the [Setup] tab.

On the left side of the screen under [Buffer/Transfer], click [Sensor Sensitivity].

Select the desired setting.

–

[High]: The sensor is more sensitive to heat variations.

–

[Normal]: The sensor is moderately sensitive to heat variations (default).

–

[Low]: The sensor is less sensitive to heat variations.

–

[Very Low]: The sensor is further less sensitive to heat variations.

–

[No detection]: The sensor does not detect heat variations.

Click [Save].

Operating Instructions

2.9 Adjusting Sensor Sensitivity

Summary of Contents for BL-C210 Series









































































































































































































































Search results

Summary of Contents for BL-C210 Series

Reviews:

Brands by name

Popular brands

Panasonic BL-C210 Series, Operating Instructions Manual

Search results

Summary of Contents for BL-C210 Series

Reviews:

Brands by name

Popular brands