Panasonic BL-C210 Series Operating Instructions Manual Download Page 153

Page: 153 / 232

Under [Input User Name and Password], enter the user name and password, then re-enter the password
for verification.

•

See Page 206 for a list of valid characters. Note that [Space], ["], ['], [&], [<], [>], and [:] cannot be
entered.

Set the following parameters as desired.

Under [Access Level], select the desired setting for [Video Display Time].

–

[Unlimited]: The user can view video images ([H.264], [MPEG-4], or [MJPEG]) from the camera
without restriction.

–

[Not permitted]: The user can view only still images.

–

[10 s]–[60 min]: The user can view video images for the selected amount of time, after which the
user can view only still images.

Operating Instructions

153

6.3 General Users

Summary of Contents for BL-C210 Series









































































































































































































































Search results

Summary of Contents for BL-C210 Series

Reviews:

Brands by name

Popular brands

Panasonic BL-C210 Series, Operating Instructions Manual

Search results

Summary of Contents for BL-C210 Series

Reviews:

Brands by name

Popular brands