Panasonic AJ-CX4000G, Operating Instructions Manual

Page: 80 / 221

– 80 –
Chapter 4 Operation — Menu settings
[FRONT MIC LEVEL]
Sets the input level of the external microphone connected to the front <MIC IN> terminal of the camera.
This is enabled only when an external microphone is connected to the <MIC IN> terminal.
The items that can be set are as follows.
f [ − 40dB], [ − 50dB], [ − 60dB]
(Factory setting: [ − 40dB])
[REAR MIC CH1/3 LEVEL]
Sets the audio input level of the external microphone connected to the rear <AUDIO IN CH1/3> terminal of the camera.
This is enabled only when the <LINE>/<MIC> selector switch is set to <MIC>.
The items that can be set are as follows.
f [ − 40dB], [ − 50dB], [ − 60dB]
(Factory setting: [ − 60dB])
[REAR MIC CH2/4 LEVEL]
Sets the audio input level of the external microphone connected to the rear <AUDIO IN CH2/4> terminal of the camera.
This is enabled only when the <LINE>/<MIC> selector switch is set to <MIC>.
The items that can be set are as follows.
f [ − 40dB], [ − 50dB], [ − 60dB]
(Factory setting: [ − 60dB])
[REAR LINE IN LEVEL]
Sets the audio input level of the device connected to the rear <AUDIO IN CH1/3>/<AUDIO IN CH2/4> terminal of the camera.
This is enabled only when the <LINE>/<MIC> selector switch is set to <LINE>.
The items that can be set are as follows.
f [ − 3dB], [0dB], [4dB]
(Factory setting: [4dB] (when [AREA SETTINGS] is [AREA 1]/[AREA 2]/[AREA 4]), [0dB] (when [AREA SETTINGS] is [AREA 3]))
[WIRELESS WARN]
Selects whether to display a warning when the reception status of the wireless microphone receiver is poor.
The items that can be set are as follows.
f [ON], [OFF]
(Factory setting: [OFF])
[WIRELESS TYPE]
Selects the type of wireless microphone receiver.
[SINGLE] Selects a single channel type wireless microphone receiver.
[DUAL] Selects a double channel type wireless microphone receiver.
(Factory setting: [SINGLE])
[REC CH SETTINGS]
[VOL. SELECT]
Selects which audio channel to assign to the <AUDIO LEVEL CH1/3>/<AUDIO LEVEL CH2/4> dial and the <F.AUDIO LEVEL> dial.
[CH1/2] Assigns level adjustment of the audio channels 1 and 2. Audio channels 3 and 4 can be automatically adjusted or adjusted
by [CH3 LEVEL CONTROL] or [CH4 LEVEL CONTROL].
[CH3/4] Assigns level adjustment of the audio channels 3 and 4. Audio channels 1 and 2 can be automatically adjusted or adjusted
by [CH1 LEVEL CONTROL] or [CH2 LEVEL CONTROL].
(Factory setting: [CH1/2])
[FRONT VOL. CH1]
Selects if the <F.AUDIO LEVEL> dial is enabled against the audio signal input to the audio channel 1.
[FRONT] This is enabled when the <AUDIO IN CH1> switch is set to <FRONT>.
[W.L.] This is enabled when the <AUDIO IN CH1> switch is set to <W.L.>.
[REAR] This is enabled when the <AUDIO IN CH1> switch is set to <REAR>.
[ALL] The <F.AUDIO LEVEL> dial is enabled regardless of the setting of the <AUDIO IN CH1> switch.
[OFF] The <F.AUDIO LEVEL> dial is disabled regardless of the setting of the <AUDIO IN CH1> switch.
(Factory setting: [OFF])
[FRONT VOL. CH2]
Selects if the <F.AUDIO LEVEL> dial is enabled against the audio signal input to the audio channel 2.
[FRONT] This is enabled when the <AUDIO IN CH2> switch is set to <FRONT>.
[W.L.] This is enabled when the <AUDIO IN CH2> switch is set to <W.L.>.
[REAR] This is enabled when the <AUDIO IN CH2> switch is set to <REAR>.
[ALL] The <F.AUDIO LEVEL> dial is enabled regardless of the setting of the <AUDIO IN CH2> switch.