Panasonic AJ-CX4000G, Operating Instructions Manual

Page: 159 / 221

– 159 –
Chapter 5 Shooting — Handling setting data
r Lens file and CAC file
↓
↓
Factory data
[OTHERS] → [MENU
INITIALIZE]
SD card SD card
CAC file
Lens files
[OTHERS] → [FILE] →
[LENS FILE(SD
CARD)] → [LOAD]
[OTHERS] → [FILE] →
[LENS FILE(SD
CARD)] → [SAVE]/
[SAVE AS]
[OTHERS]
→
[FILE]
→
[CAC
FILE(SD CARD)] → [LOAD]
Number of files: 32 Number of files: 8
CAC file (memory) Lens file (memory)
[OTHERS] → [FILE] →
[LENS FILE
(MEMORY)] → [LOAD]
[OTHERS]
→
[FILE]
→
[LENS FILE
(MEMORY)] → [SAVE]
Automatically load the file
matching with the lens
connected by [CAMERA] →
[CAC ADJ.] → [CAC CONTROL]
→ [ON]
Current data
@ @
NOTE
t Each file cannot be operated by displaying the menu during interval recording standby. Press the <REC> or <STOP> button to end interval recording,
and try the operation again.
Setting up using SD cards
An SD card can be used as a setup card that stores menu content.
Use of this data allows you to reproduce optimum setup states.
Operating SD cards
Select in the [OTHERS] menu → [FILE] → [SLOT FOR LOAD/SAVE] → [SLOT2]/[SLOT3].
If a SD card that was formatted in a standard other than SDHC/SDXC standards on a device other than this camera is inserted, file cannot be loaded or
saved. Reformat the SD card.
Formatting the SD card
1
Select the [RECORDING] menu → [FORMAT MEDIA] → [SLOT2]/[SLOT3].
Select the card slot where the SD card to format is inserted.
2
Select [SET] in the confirmation screen.
Select when not formatting.
3
When the completion message is displayed, select .
For details about the error message, refer to “Warning system” (page 203).
@ @
NOTE
t Data deleted as a result of formatting cannot be restored. Always confirm the data before formatting.
Setup file
Specified menu can be saved or loaded to/from the camera memory or a SD card.
Saving the setup file
Saves the current setting value of the camera into the camera memory or SD card.