Panasonic AJ-CX4000G, Operating Instructions Manual

Page: 65 / 221

– 65 –
Chapter 4 Operation — Menu settings
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
f [FAST], [NORMAL], [SLOW]
(Factory setting: [NORMAL])
[ATW TARGET R]
Finely adjusts the Rch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [ − 10]…[ + 10]
(Factory setting: [0])
[ATW TARGET B]
Finely adjusts the Bch output for convergence with the auto tracking white balance operation.
The items that can be set are as follows.
f [ − 10]…[ + 10]
(Factory setting: [0])
[W.BAL PRESET]
Sets the color temperature to be assigned to <PRST> of the <WHITE BAL> switch.
The items that can be set are as follows.
f [3200K], [5600K], [VAR]
(Factory setting: [3200K])
[W.BAL VAR]
Sets the value of [VAR] in [W.BAL PRESET].
Enabled when [W.BAL PRESET] is set to [VAR] and the <WHITE BAL> switch is at <PRST>.
The items that can be set are as follows.
f When the <CC FILTER> dial is set to <A>
- [2000K]…[15000K]
f When the <CC FILTER> dial is set to <B>
- [2380K]…[>15000K]
f When the <CC FILTER> dial is set to <C>
- [2730K]…[>15000K]
f When the <CC FILTER> dial is set to <D>
- [2890K]…[>15000K]
(Factory setting: [3200K])
[USER SW GAIN]
[S.GAIN]
Selects the super gain value to enable when [S.GAIN] is assigned to the USER button.
f When set to [ALL], the display will switch in the order of [30dB], [36dB], [42dB], and normal gain every time the USER button is pressed.
The items that can be set are as follows.
f [30dB], [36dB], [42dB], [ALL]
(Factory setting: [ALL])
[DS.GAIN]
Selects the digital super gain value to enable when [DS.GAIN] is assigned to the USER button.
f When set to [ALL], the display will switch in the order of [6dB], [10dB], [12dB], [15dB], [20dB], [24dB], [28dB], [34dB], and normal gain every time the
USER button is pressed.
The items that can be set are as follows.
f [6dB], [10dB], [12dB], [15dB], [20dB], [24dB], [28dB], [34dB], [ALL]
(Factory setting: [ALL])
[LENS/IRIS]
[A.IRIS LEVEL]
Sets the auto iris target value.
The items that can be set are as follows.
f [0]…[100]
(Factory setting: [50])
[A.IRIS PEAK/AVE]
Sets the ratio included in the peak for auto iris standard.
Larger the ratio, it will correspond to a peak within the iris detection window.
Smaller the ratio, it will correspond to a average value within the iris detection window.
The items that can be set are as follows.
f [0]…[100]