Panasonic AJ-CX4000G, Operating Instructions Manual

Page: 214 / 221

– 214 –
Chapter 11 Specification — Specifications
Bit rate 24 Mbps, 20 Mbps, 16 Mbps, 14 Mbps, 8 Mbps, 6 Mbps, 4 Mbps, 3 Mbps, 2 Mbps, 1.5 Mbps, 1 Mbps,
0.7 Mbps
Audio compression format AAC-LC: 48 kHz/16 bit 2ch
Supported protocol RTSP/RTP/RTMP/RTMPS
Video output
<SDI OUT1> terminal f BNC × 1
12G-SDI: 0.8 V [p-p], 75 Ω
3G/HD-SDI: 0.8 V [p-p], 75 Ω
f SDI remote control supported
f Output format (4:2:2 (10-bit) output)
3840
× 2160: 59.94p, 50p, 29.97p, 25p, 23.98p
1920 × 1080: 59.94p, 50p, 59.94i, 50i, 29.97PsF, 25PsF, 23.98PsF
1280 × 720: 59.94p, 50p
<SDI OUT2> terminal f BNC × 1
3G/HD-SDI: 0.8 V [p-p], 75 Ω
SD-SDI: 0.8 V [p-p], 75 Ω
f SDI remote control supported
f
Output format (4:2:2 (10-bit) output)
1920
× 1080: 59.94p, 50p, 59.94i, 50i, 29.97PsF, 25PsF, 23.98PsF
1280 × 720: 59.94p, 50p
720 × 480: 59.94i
720 × 576: 50i
<HDMI> terminal f HDMI type A × 1 (not compatible with VIERA Link)
f HDMI remote control supported
f Output format (4:2:2 (10-bit) output)
3840
× 2160: 59.94p, 50p, 29.97p, 25p, 23.98p
1920 × 1080: 59.94p, 50p, 59.94i, 50i, 29.97p, 25p, 23.98p
1280 × 720: 59.94p, 50p
720
×
480: 59.94p
720 × 576: 50p
Audio input/output
<AUDIO IN CH1/3> terminal
<AUDIO IN CH2/4> terminal
XLR × 2, 3-pin
<LINE>/<MIC>/<MIC + 48V> (selected by switch)
f <LINE>:
4 dBu/0 dBu/
− 3 dBu (selected by menu)
f <MIC>:
− 40 dBu/ − 50 dBu/ − 60 dBu (selected by menu)
f <MIC + 48V>
+ 48 V/OFF compatible
<MIC IN> terminal XLR × 1, 5-pin
+ 48 V ON/OFF (selected by menu)
− 40 dBu/ − 50 dBu/ − 60 dBu (selected by menu)
Wireless slot 25-pin, D-SUB, − 40 dBu, 2ch supported
<AUDIO OUT> terminal
XLR × 1, 5-pin
4 dBu/0 dBu/ − 3 dBu (selected by menu), equilibrium low impedance
<SDI OUT> terminal LPCM 4ch
<HDMI> terminal LPCM 2ch
<PHONES> terminal 3.5 mm diameter stereo mini jack × 2 (output impedance 100 Ω )
Built-in speaker
20 mm diameter, round × 1
Other input/output
<GENLOCK IN> terminal
BNC × 1, 1.0 V [p-p], 75 Ω
<TC IN/OUT> terminal BNC × 1
Used as input/output terminal (input/output switch by menu)
f Input: 0.5 V – 8.0 V [p-p], 10 k Ω
f Output: 2.0 V±0.5 V [p-p], low impedance
<DC IN> terminal
XLR × 1, 4-pin, DC 12 V (DC 11.0 V – 17.0 V)
<DC OUT> terminal 4-pin, DC 12 V (DC 11.0 V – 17.0 V), maximum output current 1.5 A
<LENS> terminal 12-pin
<VF> terminal 20-pin
<LAN> terminal RJ-45 XLRnet connector: 1000BASE-T/100BASE-TX/10BASE-T
<USB2.0 HOST> terminal Type A connector, 4-pin (5 V, 0.5 A), for attaching the wireless module (optional)
<USB DEVICE> terminal USB 3.1 GEN1 type C connector, with USB mass storage function, without USB bus-powered function