– 67 –
Chapter 4 Operation — Menu settings
The items that can be set are as follows.
f
[
−
200]…[200]
(Factory setting: [0])
[LENS R FLARE]
Adjusts the Rch flare level.
The items that can be set are as follows.
f
[0]…[100]
(Factory setting: [0])
[LENS G FLARE]
Adjusts the Gch flare level.
The items that can be set are as follows.
f
[0]…[100]
(Factory setting: [0])
[LENS B FLARE]
Adjusts the Bch flare level.
The items that can be set are as follows.
f
[0]…[100]
(Factory setting: [0])
[AGC]
[AGC]
Sets the operation of the auto gain control.
[ON]
Performs the operation of the [AGC] function that automatically adjusts camera gain.
[OFF]
Does not perform the operation of the [AGC] function that automatically adjusts camera gain.
(Factory setting: [OFF])
[AGC LIMIT]
Sets the maximum gain value during [AGC] operation.
The items that can be set are as follows.
f
[3dB], [6dB], [12dB], [18dB]
(Factory setting: [6dB])
[AGC POINT]
Sets the F value to switch control from auto iris to [AGC] during [AGC] operation.
The items that can be set are as follows.
f
[F2.8], [F4.0], [F5.6]
(Factory setting: [F4.0])
[BLACK SHADING]
[CORRECT]
Enables/disables the black shading correction.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])
[DETECTION]
Executes the black shading correction.
[WHITE SHADING]
[CORRECT]
Enables/disables the white shading correction.
The items that can be set are as follows.
f
[ON], [OFF]
(Factory setting: [ON])
Summary of Contents for AJ-CX4000G
Page 12: ...Before using the camera read this chapter Chapter 1 Overview ...
Page 177: ...This chapter describes about the output image Chapter 7 Output ...
Page 202: ...Maintenance of the camera and error message are described Chapter 10 Maintenance ...
Page 221: ...Web Site https www panasonic com Panasonic Corporation 2019 ...