Control Reference Guide: Slots, etc.
21
Cont
rol
Ref
e
re
nce G
u
ide
1.
POWER lamp
(
➝
“Turning Power On and Off” page 27)
2.
POWER button
Press and hold to turn power on and off.
(
➝
“Turning Power On and Off” page 27)
3.
Speaker
Outputs monitored audio. Speaker output is
disabled when headphones are connected.
4.
Headphone jack
Headphones can be plugged in here.
Outputs monitored audio when headphones
are connected.
5.
USB HOST port (USB 3.0 Type A)
(
➝
“USB HOST” page 37)
◆
NOTE:
• Use double-shielded cable to connect to
this port.
• Use a USB 3.0 compliant cable to connect
USB 3.0 compatible storage devices.
6.
P2 card access lamps
(
➝
“P2 Card Access Lamp and P2 Card Status”
page 29)
7.
P2 card slots
(
➝
“Inserting a P2 Card” page 29)
8.
EJECT buttons
(
➝
“Inserting a P2 Card” page 29)
9.
SD/SDHC memory card slot and access lamp
Insert an SD/SDHC memory card.
Insert the card cut-corner-edge first and
label-side up, until it latches into place.
To remove it, ensure that the green lamp is
off, then release the latch by gently pushing
the card in again.
See the following for details.
(
➝
“Use of SD/SDHC Memory Cards” Vol. 2,
page 92)
Slots, etc.
2
6
7
8
9
1
3
4
5
