Basic Operation: About P2 Cards
29
Basic
O
perat
ion
Basic Operation
About P2 Cards
1
Hold the POWER button for one second to
turn the unit on.
2
Insert a P2 card into a P2 card slot until the
EJECT button pops out.
3
Fold the EJECT button toward the right.
Inserting a P2 Card
ヒ
ビ
1
P2 Card Access Lamp and P2
Card Status
P2 Card
Access Lamp
P2 Card Status
Lights green
Writing and reading are
enabled.
Lights orange
Writing and reading are
enabled for the current
recording (including LOOP
REC).
Flashing
orange
Writing or reading is in
progress.
Currently accessing P2 card
using USB device mode.
NOTE:
• Do not turn the unit off or
eject the P2 card when the
lamp is flashing orange,
such as while recording.
Fast flashing
orange
P2 card being recognized.
Flashing green No available space on the P2
card. Only reading is
possible.
The P2 card contains the
maximum number of clips.
Only reading is possible.
The write-protect switch on
the P2 card is set to
PROTECT. Only reading is
possible.
