Setup Menu: Menu items
63
Set
up
M
enu
Use this menu to make video settings.
RUN MODE
Specifies an operating mode that advances the internal time code
generator.
REC RUN
: The internal time code generator is advanced only
during recording.
FREE RUN
: When the power is on, the internal time code
generator is advanced regardless of operating mode.
NOTE:
• When ON is selected in the SETUP - BASIC - VFR REC menu
setting, the time code advances only during recording even
when FREE RUN is selected.
M
M
EXT TC SEL
Specifies the time code used when an external time code is used.
EXT LTC
: Uses LTC from the TIME CODE IN connector.
SLTC (VITC)
: Uses LTC data attached to serial signal input to
HD SDI IN. When 480i or 576i is set in the SETUP - SYSTEM -
FORMAT menu setting, VTIC data input to SD SDI IN is used.
M
M
DF MODE
Sets the DF or NDF mode for CTL and TCG.
DF
: Uses drop frame mode.
NDF
: Uses non-drop frame mode.
M
M
M
HD EMBD VITC
Specifies whether or not VITC data will be superimposed on HD
SDI output.
ON
: Superimposes VITC.
OFF
: Does not superimpose VITC.
M
M
M
HD EMBD LTC
Specifies whether or not LTC data will be superimposed on HD
SDI output.
ON
: Superimposes LTC.
OFF
: Does not superimpose LTC.
M
M
M
TC OUTPUT
REF
Switches the phase of time code output from the TIME CODE OUT
connector relative to external LTC input when TCG MODE is set to
EXT. (Only in EE mode)
VOUT
: Synchronized with output video signal.
TC IN
: Synchronized with the external time code input.
M
M
Item
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
indications
Mode
2D
(Main)
3D
SYNC PB
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59.94 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
VIDEO
Item
Settings and brief function description
XX indicates factory default settings.
SYSTEM FREQ
indications
Mode
2D
(Main)
3D
SYNC PB
INPUT SEL
Selects the video input signal.
SDI
: Selects the SDI connector.
INT SG
: Selects the internal signal generator. The signal
switches to the internal signal selected using the menu “INT
SG”.
M
M
INT SG
Sets the internal signal type. SMPTE and ARIB signals are
available in HD mode only (black in SD mode).
100 %CB
: 100% color bar
75 %CB
: 75% color bar
SMPTE
: SMPTE color bar
ARIB
: ARIB color bar
BLACK
: Black
M
M
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
59.94 Hz
50 Hz
23.98 Hz
24 Hz
59-23 Hz
60-24 Hz
