DigitalFlow™ XMT868i Programming Manual
3
Chapter 1. Programming Site Data
1.2.2
Accessing the Keypad Program
Six keys on the infrared keypad enable users to program the XMT868i:
•
[Enter]
- confirms choice of a specific option and data entry within the option
•
[Escape]
- allows users to exit from a specific option without entering unconfirmed data
•
[
] and [
]- enable users to highlight a specific window in the display option or to scroll through a list of options
(parameters, letters, numbers) in a menu
•
[
] and [
] - enable users to scroll to a specific option, among choices in an option, or to a character in a text
entry. Also, if the [
] key is pressed when the cursor position (underlined) is at the first digit of the bottom LCD
line, the previous parameter is displayed and can be edited.
When you power up the XMT868i, the initial screen shows the model and software version:
The meter then starts to display measured parameters.
To enter the
Keypad Program
, press the
[Escape]
key, followed by the
[Enter]
key, and the
[Escape]
key again.
Each
successive key must be pressed within 10 seconds of the prior key. The
Keypad Program
window appears:
Press
[Enter]
to begin programming in the
Channel
or
Global
menus.
IMPORTANT:
If the keypad has not been pressed for 10 minutes, the XMT868i exits the Keypad Program and returns to
displaying measurements. The meter retains any configuration changes that were confirmed with the
[Enter]
key, and restarts as if the operator had completed the programming cycle.
Panametrics
XMT868i X3A.STD
CH1 VEL
E1
10.00
Ft/s
KEYPAD PROGRAM
PROG
1
Summary of Contents for DigitalFlow XMT868i
