Panametrics DigitalFlow XMT868i, Programming Manual

Page: 104 / 164

Appendix C. Programming the XMT868i Using PanaView™
30 DigitalFlow™ XMT868i Programming Manual
C.5.2 Entering Data in the Channel System Option (cont.)
6. Double-click on the desired number of Decimal Digits (digits to the right of the decimal point) in the volumetric
flow display.
7. Double-click on the desired Totalizer Units for the totalized flow rate display (listed in Table 27).
.
8. Double-click on the desired number of Decimal Digits (digits to the right of the decimal point) in the totalized flow
rate display.
The program now varies, depending on whether you have activated MASS FLOW (see the Programming Manual for
details) or the ENERGY OPTION.
• If you have activated MASS FLOW, continue to step 1 on the next page.
• If you have activated the ENERGY OPTION (but not MASS FLOW), skip to step 1 on page 32.
• If you have activated neither option, PanaView returns to the Channel PROGRAM window shown in Figure 42 on
page 26. Proceed to the Pipe option.
Table 27: Totalizer Units
English Metric
Gallons Liters
MegaGallons = million gallons Megaliters = million liters
Cubic feet Cubic m
MegaCubicFt = million cubic feet MegaCubicm = million cubic meters
Barrels Barrels
Megabarrels = million barrels Megabarrels = million barrels
Acre-inches
Acre-feet