![background image](http://html1.mh-extra.com/html/panametrics/digitalflow-xmt868i/digitalflow-xmt868i_programming-manual_3415144072.webp)
Chapter 3. Logging Data
12
DigitalFlow™ XMT868i Programming Manual
•
Click on the
Contents
tab (see Figure 21 on page 10) for a list of all the data points logged to date for the
parameter currently highlighted on the
Log Items
tab.
•
Click on the
[Graph]
option button to display a graphical representation of the data logged to date.
Note:
The graph is displayed in its own window, which is opened on top of the
PC Log
window. For instructions on
using the
Graph Log
window, refer to the
Graphing Output
section in Chapter 2 of the PanaView User’s
Manual.
• Click on the
[Refresh]
option button to update the information shown on the
Contents
tab and in the
Graph Log
window. Any data logged since the last use of the
[Refresh]
option button is added to the list and to the graph.
Remember that only two parameters per channel may be graphed, and that the same two parameters must be
graphed for each channel of a multi-channel graph display. When you have finished viewing the graph, click on the
[Close]
option button to close the
Graph
window and leave the log running.
4.
To terminate the logging process, simply click on the
[Stop]
option button, which has replaced the original
[Start]
option button. (The
Stop Time
automatically appears in the
PC Log
window.)
Because a PC log has no specific
“Stop Time,”
the log will continue to run until it is manually stopped (unless the PC is
turned off or you run out of hard drive space).
Summary of Contents for DigitalFlow XMT868i
