Controlling System Power
This section describes how to power on, power off, and reset the server.
■
“Powering the Host On and Off” on page 107
■
“Resetting the Server” on page 111
Related Information
■
“Installation Procedure Overview” on page 11
■
Oracle Integrated Lights Out Manager (ILOM) 4.0 Documentation Library at:
Powering the Host On and Off
Your server has three power modes (states): Power off, Standby power, and Main power.
Power State
Description
Indicators
Action
Power off
The server is completely
powered off when the AC power
cords are disconnected.
All indicators are off.
The server is disconnected
from all power sources.
Disconnect all four power
cords to completely remove
power.
Caution -
Equipment damage.
Do not disconnect power cords
when systems are in Main
power mode. Place all systems
in Standby power mode before
disconnecting power cords.
Standby
power
When the server is in Standby
power mode, the service
processor is powered on but the
host is powered off.
The green system System OK
indicator blinks slowly.
The green SP OK indicator is
steady on.
If the server is completely
powered off, plug in all four
power cords to apply Standby
power.
If the server is in Main power
mode, use Oracle ILOM or
the Power button to remove
Controlling System Power
107
Summary of Contents for X8-8
