Oracle X8-8 Installation Manual Download

Page: 11 / 134

Installation Procedure

This section provides an overview of the Oracle Server X8-8 installation procedure. Review the

entire installation procedure and find links to more information about each step.

Installation Procedure Overview

The following table summarizes the tasks that you must perform to properly install Oracle

Server X8-8.

Step Description

Links

Review the product notes for any late-breaking information about

the server.

Oracle Server X8-8 Product Notes

Prepare to install the server.

■ Review the server site requirements, specifications, and

components.

■ Confirm that you received all the items you ordered.
■ Familiarize yourself with electrostatic discharge (ESD) and

safety precautions.

■ Assemble the required tools and equipment.

■

“Preparing for Server

Installation” on page 13

■

“Site Planning

Checklists” on page 123

Review the server features.

“Server Features and

Components” on page 25

Install any separately shipped optional components.

Oracle Server X8-8 Service Manual

Review the server management features.

“Server Management” on page 37

Install the server into a rack.

“Installing the Server Into a

Rack” on page 41

■ Attach cables and power cords to the server.
■ Power on the server.

“Connecting Cables and Applying

Power” on page 57

Connect to Oracle Integrated Lights Out Manager (ILOM).

“Using Oracle Integrated Lights Out

Manager (ILOM)” on page 73

Prepare the server drives and configure RAID.

“Configuring Storage

Drives for Operating System

Installation” on page 89

Installation Procedure

Summary of Contents for X8-8







































































































































Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands

Oracle X8-8, Installation Manual

Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands