Oracle X8-8, Installation Manual

Page: 109 / 134

Power On the Host Using the On/Standby Button
■
To perform an immediate shutdown, press and hold the On/Standby button
for at least 5 seconds.
The System OK indicator blinks. The service processor SP OK indicator is steady on. The
server goes to Standby power mode.
Caution -
Data loss . An immediate shutdown abruptly closes all applications and files without
saving changes.
■
To completely power off the server, disconnect the four power cords from
the back panel of the server.
Power On the Host Using the On/Standby Button
1.
Verify that the server is in Standby power mode.
In Standby power mode:
■
Host is powered off but the SP is powered on.
■
Power supplies are connected to a power source.
■
AC OK power supply indicators illuminate.
■
SP OK indicator is steady on.
■
System OK status indicator blinks slowly.
See front and back panels in “Server Features and Components” on page 25 .
2. Locate and press the On/Standby buttons on the front panel FIM.
The front panel includes buttons for System A and System B. System B is only present on dual
4-socket systems.
With the power on:
■
Host boots and the server enters Main power mode.
■
System OK indicator goes steady on when the host is fully booted.
Power the Host On and Off Using Oracle ILOM
This procedure provides Oracle ILOM web interface and CLI instructions to remotely power on
or power off the host.
Controlling System Power 109