Oracle X8-8 Installation Manual Download

Page: 77 / 134

The Summary Information page appears, indicating that you successfully logged in to

Oracle ILOM.

■

To establish a connection to the Oracle ILOM CLI:

From the command line, initiate a secure shell session, type:

ssh

username

host

Where

username

is the user name of an Oracle ILOM account with Administrator

privileges, and

hostname

is either the IP address or hostname (when using DNS) of

the server SP.
The Oracle ILOM password prompt appears.

Password:

At the Oracle ILOM password prompt, type your password and press

Enter.

Password:

changeme

Oracle ILOM displays the default command prompt ->, indicating that you

successfully logged in to the Oracle ILOM CLI.

Using Oracle Integrated Lights Out Manager (ILOM)

Summary of Contents for X8-8







































































































































Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands

Oracle X8-8, Installation Manual

Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands