manualshive.com logo in svg

Oracle X8-8, Installation Manual

Share
Download
Oracle X8-8 Installation Manual Download Page 38

Oracle Integrated Lights Out Manager (ILOM)

Tool/Link

Type and Environment

Function

■ Is available as a standalone product for

supported operating systems. Refer to the

support matrix for specific information:

https://www.oracle.com/goto/ohmp

SNMP or locally using command-line

interface tools.

“Unified Extensible

Firmware Interface

(UEFI)” on page 39

Accessed by booting the system and

interrupting the boot process. Provides a

simple graphical user interface.

Provides hardware-level management of

system functionality.

Oracle Integrated Lights Out Manager (ILOM)

Oracle Integrated Lights Out Manager (ILOM) enables you to connect to the server service

processor (SP) and then manage Oracle Server X8-8. The server is shipped initially with the

latest version of Oracle ILOM.

Oracle ILOM software resides on the server SP and allows you to monitor and manage server

components. The software functions include:

■

Configuring network information

■

Viewing and editing hardware configurations for the SP

■

Monitoring vital system information and viewing logged events

■

Managing Oracle ILOM user accounts

You can access the server SP in either of the following ways:

■

“Log In to Oracle ILOM Using a Local Serial Connection” on page 75

■

“Log In to Oracle ILOM Using a Remote Ethernet Connection” on page 76

For more information on Oracle ILOM, refer to the Oracle Integrated Lights Out Manager

(ILOM) Documentation Library at 

https://www.oracle.com/goto/ilom/docs

.

See 

“Using Oracle Integrated Lights Out Manager (ILOM)” on page 73

.

Oracle Hardware Management Pack

Oracle Hardware Management Pack provides command-line interface (CLI) tools for managing

your servers, and an SNMP monitoring agent.

■

Oracle Hardware Management Pack CLI

■

Allows you to configure Oracle servers

38

Oracle Server X8-8 Installation Guide • June 2019

Summary of Contents for X8-8







































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands