Oracle X8-8 Installation Manual Download

Page: 84 / 134

Redirect Host Server Desktop or Storage Devices

■

The following user credentials are required:

■

Console ( c ) user role privileges are required to use Oracle ILOM Remote System

Console Plus.

■

A user account on the host server is required to log in to the redirected host desktop.

■

To exclusively control the storage media from the Oracle ILOM System Remote

Console Plus application, you must have root privileges on a Linux client or root

administrator privileges on a Windows client.

■

The mouse mode is set correctly (see

“Set the Mouse Mode” on page 83

■

Java Runtime Environment (JRE) 7, 1.3.1 or later is installed. For IPv4 networks, a 32-

bit or 64-bit JDK is required. For IPv6 networks, a 32-bit or 64-bit Java Development Kit

(JDK) 170636 or higher is required.

■

The remote management client is connected to a network that has access to one of the

Ethernet management ports on the server.

To launch the Oracle ILOM Remote System Console Plus application, follow these steps:

Log in to the Oracle ILOM web interface.

For instructions, see

“Log In to Oracle ILOM Using a Remote Ethernet

Connection” on page 76

To launch the Oracle ILOM Remote System Console Plus application, click

Remote

Control

→

Redirection

, and click the

Launch Remote Console

button.

The following events can occur:

■

If this is the first time launching the Oracle ILOM Remote System Console Plus application,

a prompt to launch the Java web start program appears. Follow the instructions provided

in the prompt to continue launching the Oracle ILOM Remote System Console Plus

application.

■

If your system does not meet the Java security requirements for launching Oracle ILOM

Remote System Console Plus, a Java error message appears. Follow the instructions

provided in the Java error message to launch the Oracle ILOM Remote System Console

Plus application.

■

The Oracle ILOM Remote System Console Plus window for video redirection appears.

■

The redirected video console displays the remote host server in its present state. For

example, if the host server is powering on, a set of boot messages appears in the video

console.

■

When a prompt for logging in to the host server appears, type your user credentials for the

remote host server.
For additional details about launching the Oracle ILOM Remote System Console Plus

application, click the

More Details

link on the Redirection web page.

Oracle Server X8-8 Installation Guide • June 2019

Summary of Contents for X8-8







































































































































Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands

Oracle X8-8, Installation Manual

Search results

Summary of Contents for X8-8

Reviews:

Related manuals for X8-8

Brands by name

Popular brands