Oracle Fabric Interconnect F2-12, Installation Manual

Page: 41 / 118

Install the Switch
6.
When the chassis is correctly installed, use a No. 2 Phillips screwdriver to
secure the switch chassis to the front rack posts with the captive screws at each
side.
7. Consider your next task.
■ If you are installing I/O modules, do that now.
See “Install an I/O Module” on page 42 .
■
If you are not installing additional components, go to Step 8 .
8.
Consider your next task.
■
See “(Optional) Assemble the QSFP Cables” on page 58 or “(Optional) Assemble the
SFP+ Cables” on page 60 .
■
See “Route the Cables” on page 62 .
Related Information
■
“Stabilize the Rack” on page 29
■
“Mark the Rack” on page 30
■
“Install the Rackmount Hardware” on page 32
■
“Install the Cable Management Comb” on page 37
Installing the Switch 41