Oracle Fabric Interconnect F2-12, Installation Manual

Page: 29 / 118

Installing the Switch
These topics describe how to install the switch.
Description Links
Ready the rack for the switch. ■ “Stabilize the Rack” on page 29
■ “Mark the Rack” on page 30
■ “Install the Rackmount Hardware” on page 32
■ “Install the Cable Management Comb” on page 37
■ “Route the Power Cords and Management
Cables” on page 38
Install the switch into the rack. ■ “Install the Switch” on page 39
If necessary, install I/O modules into the
switch.
■ “Remove a Filler Panel” on page 47
■ “Install an I/O Module” on page 42
Related Information
■
“Understanding the Switch” on page 11
■
“Confirming Specifications” on page 17
■
“Preparing for Installation” on page 23
■
“Connecting Cables” on page 51
■
“Powering On the Switch” on page 75
■
“Verifying Functionality” on page 89
Stabilize the Rack
Caution -
To reduce the risk of personal injury, stabilize the rack and extend all anti-tilt devices
before installing the switch.
1.
Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
Installing the Switch 29