Oracle Fabric Interconnect F2-12, Installation Manual

Page: 75 / 118

Powering On the Switch
These topics describe how to power on the switch for the first time.
Description Links
If you are not using DHCP-assigned IP
addresses, connect the serial management
device.
■ “Connect the SER MGT Cable” on page 75
■ “Connect a Serial Management Device to the SER MGT
Port” on page 77
Connect the power cords. ■ “Connect Power Cords” on page 77
Power on the switch. ■ “Power On the Switch” on page 81
If you are not using DHCP-assigned IP
addresses, log in to the SP through the SER
MGT port.
■ “Log In to the SP (SER MGT)” on page 82
■ “Assign a Static IP Address to the SP” on page 83
■ “Assign a Static IP Address to the SCP” on page 85
Log in to the SP through the network
management interface.
■ “Log In to the SP (Network Management)” on page 86
Related Information
■
“Understanding the Switch” on page 11
■
“Confirming Specifications” on page 17
■
“Preparing for Installation” on page 23
■
“Installing the Switch” on page 29
■
“Connecting Cables” on page 51
■
“Verifying Functionality” on page 89
Connect the SER MGT Cable
1. Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
2.
Orient the RJ-45 connector to the SER MGT receptacle.
Powering On the Switch 75