Oracle Fabric Interconnect F2-12, Installation Manual

Page: 39 / 118

Install the Switch
■
“Install the Cable Management Comb” on page 37
■
“Install the Switch” on page 39
■
“Install an I/O Module” on page 42
■
“Remove a Filler Panel” on page 47
Install the Switch
Caution - The weight of the switch is such that a lift or two people are used to raise the switch
to the shelf rails.
1. Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
2.
Locate the bracket on each side of the switch.
This bracket will used to correctly seat the switch in the rack.
3.
Carefully lift the switch and begin sliding it into the rack, from the front of the
rack rearward.
Installing the Switch 39