Oracle Fabric Interconnect F2-12, Installation Manual

Page: 97 / 118

Verify Connectivity
Management Switch for Oracle Fabric Interconnect F2-12
SEFOS login:
b. Log in to SEFOS.
SEFOS login: root
Password: admin123
SEFOS#
The default password is
admin123
.
c. Display the state of the Ethernet ports.
SEFOS# show interfaces status
Port Status Duplex Speed Negotiation Capability
--- ------ ------ ----- ----------- ----------
Gi0/1 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/2 not connected Half - Auto Auto-MDIX on
Gi0/3 not connected Half - Auto Auto-MDIX on
Gi0/4 not connected Half - Auto Auto-MDIX on
Gi0/5 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/6 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/7 not connected Half - Auto Auto-MDIX on
Gi0/8 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/9 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/10 not connected Half - Auto Auto-MDIX on
Gi0/11 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/12 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/13 not connected Half - Auto Auto-MDIX on
Gi0/14 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/15 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/16 not connected Half - Auto Auto-MDIX on
Gi0/17 connected Full 1 Gbps Auto Auto-MDIX on
Gi0/18 connected Full 1 Gbps Auto Auto-MDIX on
SEFOS#
In the output:
■
Port
– Port of the EMS module as connected to chassis components.
■
Gi0/1
to
Gi0/4
– Four 1GBASE-T ports on the left rear of the switch.
■
Gi0/5
to
Gi0/11
– One port per slot on the rear panel.
Gi0/5
is connected to slot 0,
and
Gi0/16
is connected to slot 11.
■
Gi0/17
and
Gi0/18
are internal to the switch architecture.
■
Status
– State of the port.
■
Duplex
,
Speed
, and
Negotiation
– Parameters of the link.
■
Capability
– Indicates if auto-crossover capability is on.
Verifying Functionality 97