Oracle Fabric Interconnect F2-12, Installation Manual

Page: 66 / 118

Connect the PrizmMT Cables
■
Connect the QSFP cables if necessary.
See “Connect the QSFP Cables” on page 69 .
■
Connect the LC cables if necessary.
See “Connect the LC Cables” on page 71 .
■
Secure the cables to the cable management comb.
See “Secure Cables to the Cable Management Comb” on page 73 .
Related Information
■
“Chassis Cable Requirements” on page 51
■
“I/O Module Cable Requirements” on page 52
■
“Standard MT and PrizmMT Cables” on page 53
■
“Standard MT and PrizmMT Cable Precautions” on page 55
■
“General Cable Precautions” on page 56
■
“(Optional) Assemble the QSFP Cables” on page 58
■
“(Optional) Assemble the SFP+ Cables” on page 60
■
“Route the Cables” on page 62
■
“Connect the PrizmMT Cables” on page 66
■
“Connect the QSFP Cables” on page 69
■
“Secure Cables to the Cable Management Comb” on page 73
Connect the PrizmMT Cables
Use this procedure to connect the PrizmMT cables to the chassis gateway ports.
Note -
Only PrizmMT receptacles labeled 5 and 6 are for 4x magenta-colored housing
PrizmMT cables. All other PrizmMT receptacles are for 12x black-colored housing PrizmMT
cables. The 12x cables (black-colored housing) are used for connecting the virtualization switch
to leaf switches, spine switches, and other F2-12 switches through inter-switch links.
1. Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
2. Remove any filler plug (if installed) from the PrizmMT receptacle where you are
installing the cable, and visually inspect the receptacle.
The receptacle should be clean and free of dirt or debris.
66 Oracle Fabric Interconnect F2-12 Installation Guide • November 2016