Oracle Fabric Interconnect F2-12, Installation Manual

Page: 72 / 118

Connect the LC Cables
Note -
Depending on whether you assembled the LC cable and SFP+ connector, the connector
might be attached to the cable instead of inserted into the module receptacle. Also, ensure
the metal clip on the transceiver is in the closed position prior to connecting the cable to the
transceiver.
5. Push the connector in until you feel a click.
6. Lay the cable into a slot on the cable management comb.
7.
Repeat Step 2 through Step 8 for each cable to be connected.
8. Secure the cables to the cable management Comb.
See “Secure Cables to the Cable Management Comb” on page 73 .
Related Information
■
“Chassis Cable Requirements” on page 51
■
“I/O Module Cable Requirements” on page 52
■
“Standard MT and PrizmMT Cables” on page 53
■
“Standard MT and PrizmMT Cable Precautions” on page 55
■
“General Cable Precautions” on page 56
■
“(Optional) Assemble the QSFP Cables” on page 58
■
“(Optional) Assemble the SFP+ Cables” on page 60
■
“Route the Cables” on page 62
■
“Connect the RJ-45 Ethernet Cables” on page 63
■
“Connect the PrizmMT Cables” on page 66
72 Oracle Fabric Interconnect F2-12 Installation Guide • November 2016