Oracle Fabric Interconnect F2-12, Installation Manual, Page: 63 / 118

Connect the RJ-45 Ethernet Cables
■
“I/O Module Cable Requirements” on page 52
■
“Standard MT and PrizmMT Cables” on page 53
■
“Standard MT and PrizmMT Cable Precautions” on page 55
■
“General Cable Precautions” on page 56
■
“(Optional) Assemble the QSFP Cables” on page 58
■
“(Optional) Assemble the SFP+ Cables” on page 60
■
“Connect the RJ-45 Ethernet Cables” on page 63
■
“Connect the PrizmMT Cables” on page 66
■
“Connect the QSFP Cables” on page 69
■
“Secure Cables to the Cable Management Comb” on page 73
Connect the RJ-45 Ethernet Cables
Use this procedure to connect RJ-45 cables to an Oracle F2 Quad Port 10GBASE-T I/O module
as well as to the switch chassis.
1. Identify the prerequisite and subsequent installation tasks that you must
perform in conjunction with this task.
See “Installation Task Overview” on page 11 .
2. Orient the RJ-45 connector to where it will connect to the switch.
Connecting Cables 63