Oracle Fabric Interconnect F1-15, User Manual

Page: 66 / 176

Understanding Chassis Components and Indicators
FIGURE 39
LED Codes — 10-Port Gigabit Ethernet Module
Eject Status Description
Blinking green Blinking green I/O card is running diagnostics
Off Blinking green I/O card is booting
Off Solid green I/O card is up/running
Off Solid amber Fault detected
Solid blue Solid green I/O card is down (power to card is off)
Blinking blue Solid green I/O card is shutting down
4-Port GE Ethernet I/O Module LED Codes
Status LEDs show information for the module and each port. The module has two LEDs that
show status and power status for the module:
■
the Module Status LED indicates the module's runtime or boot time status, which is affected
by whether the module is inserted or being ejected.
■
the Power Status LED indicates the condition of power to the module:
Each Gigabit Ethernet port has two LEDs that indicate the state of the port:
■
one LED indicates physical link. If the port is enabled and the physical link is up, the LED
glows steady green. If the port is enabled and the physical link is down, the LED blinks
green. If the port is disabled or not receiving power, the LED is dark.
■
one LED indicates traffic activity on the port. If the physical link is up and traffic is
detected, the LED blinks yellow whenever traffic exists on the link. If the link is up but has
no traffic activity, the LED glows steady yellow (not blinking). If the port is disabled, the
link is down, or the port is not receiving power, the LED is dark.
66 Oracle Fabric Interconnect Hardware User's Guide • July 2016