Oracle Fabric Interconnect F1-15, User Manual

Page: 51 / 176

Install the Fabric Interconnect F1-4
Use four (4) M3.5 x .6 x 6 mm Phillips countersink screws per bracket.
Note -
Figure 24, “Installing the Rack Depth Measures,” on page 51 shows installing the
rack-depth measures for one depth. Your rack depth might differ, so the rack-depth measures
might need to slide forward or backward depending on the depth of your rack.
FIGURE 24 Installing the Rack Depth Measures
9. Choose the correct rack-mounting screws for your rack. The Fabric Interconnect
is shipped with three complete sets of rack-mounting screws (10-32, 12-24 and
M6), which support a wide variety of common equipment racks.
10. Find the right angle brackets (7089458) and use the correct rack-mounting screw
to attach the angle brackets to the exterior face of the rear rack posts. The right
angle brackets must be mounted on the outside of the rear posts. See Figure 25,
“Attaching Right Angle Brackets to the Equipment Rack,” on page 52 .
Use two (2) pan-head screws per bracket. Use the appropriate screw for your rack type:
■
10-32 x .75” Phillips pan-head screws
■
12-24 x .75” Phillips pan-head screws
■
M6 x 20 mm Phillips pan-head screws
Installing the Fabric Interconnect 51